Quooker PRO3-VAQ E Installation Guide download pdf (Page 11)

Connecting waste

The Quooker tank releases expansion water via the inlet combination which is

fed into the grey funnel. The funnel is connected to the waste pipe via the

supplied waste hose. The drilling kit, also supplied, can be used to make a

connection to the waste pipe.

It is important to keep the height distance between the inlet combination and

the connection to the waste pipe as large as possible to prevent waste water

from flowing back.

1 2

3 4

1 Drilling hole

Using the drill bit supplied, drill and

tap in one operation a threaded hole

in the waste pipe. Drill slowly so that

the PVC does not melt. Turn back anti-

clockwise to preserve the thread.

2 Fit connector

First try to screw the PVC connector in

the hole before fitting permanently

with PVC glue.

3 Connect hose

to waste pipe

Slide the waste hose over the PVC

connector.

4 Connect hose to

inlet combination

Create a u-bend (or loop) in the hose

and connect it to the funnel of the

inlet combination. The u-bend will

create a water lock to block smells

from the waste pipe. As the water is

being heated, the inlet combination

will release drips of water into the

grey funnel. The open funnel is

required to prevent pressure build-up.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Quooker PRO3-VAQ E Installation Guide Page 11