Quooker PRO3-VAQ E Installation Guide download pdf (Page 8)

1 Tap through

work top

Push the tap through the hole in the

work top. NOTE: When fitting the tap

in a 32 mm hole, the black plastic ring

needs to be removed from the tap

first.

2 Securing the

tap

Set the tap to the desired position

and secure it with the metal ring and

screw ring supplied.

3 Securing tap

screws

Tighten the screws in the screw ring.

1 2

Fitting Nordic tap

• NOTE: The total length of the hose between the boiling-water tap and tank is

only 70 cm. The tank must therefore be fitted close to the tap. Extension

hoses are available in different lengths but are not normally required.

• NOTE: The small fibre washers supplied with the tap rings are not required

yet at this point. One will be used for connecting the tap and tank hose (see

section E), the second one is a spare.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Quooker PRO3-VAQ E Installation Guide Page 8