Quooker PRO3-VAQ E Installation Guide download pdf (Page 11)

Connecting tank to Nordic tap

• The Quooker tank is supplied with a UK 3 pin plug and requires a standard

13 amp earthed socket.

• If the mains lead is damaged, it must be replaced by the manufacturer, their

agent or a qualified technician.

• The Nordic boiling-water tap is equipped with a light ring that shows whether

the heating element is in operation or not. When touched the ring lights up

to draw attention to the fact that boiling water can be released.

• The ‘Q’ on the lid is the on/off switch.

1 Connecting

tank and tap

Position the tank and connect to the

inlet valve using the washer provided.

Using size 10 and 14 socket spanners,

connect tap hose to fitting at the top

of the tank.

2 Electrical

connection

Insert the LED cable into the relevant

opening. Connect the tank to an

earthed socket. Do not switch on until

the tank is filled with water.

3 Filling tank

Open Nordic tap and angle stopcock.

Check for leaks. Rinse Quooker for

a few minutes, until the water is clear.

The initial black colouring is activated

carbon from the filter and completely

harmless.

4 Switching on

Switch the tank on. After the Quooker

has heated up, the entire content of

boiling water must be flushed out

once before use.

1 2

3 4

1 2 ... 6 7 8 9 10 11 12 13 14 15

No comments

Quooker PRO3-VAQ E Installation Guide Page 11